Infra red non contact brake & tyre measurement

This new Kit-System will replace the previous system and combines the datalogger, GPS and extension memory in one, smaller housing. So it will offer ...

Ride height sensor to measure ride height, roll and pitch (multiple sensors required)

Small size, low power, dynamic GPS module, high speed GPS

Function Sensor reacts to crossing metal parts (e.g. screws or parts of brake disc) Induction signals are measured and counted Appropriate ...

Converts K Type thermocouples to CAN

Converts 8 high speed analogue channels to CAN

Converts up to 8 analogue and 2 digital channels to CAN

Tyre temperature kit with up to 8 sensors - CAN output

Converts LAMBDA sensor to CAN output

High accuracy 3 axis accelerometer with built in gyro, CAN output.

Converts up to 4 wheel speed signal into TTL Digital

Small size, low power, dynamic GPS module, high speed GPS

Telemetry of CAN Data, up to 8 channels

Controls ECU and other vehicle electronics

Ride height sensor to measure ride height, roll and pitch (multiple sensors required)

SENSORS - Length Measurement - WIre Potentiometer

Magnetic Angle Sensor:Dual Channel (Hi & Lo Res.) Includes two seperate amplifiers

Angle Potentiometer:Range 340 Deg

Magnetic Angle Sensor:Range +/-5 Deg (10, 20, 30 deg versions available)

Water/Airbox Temperature Sensor NTC type D8mm eyelet

Infra Red Temperature Sensor: Range 0 - 1000 DegC
Cable spec: Raychem 55M1434-26-0/2/9-9 sleeved with RW-200-E-1/8 - 1m
Internal screen ...

Infra Red Temperature Sensor:
Range -30 - 200 DegC

Air Pressure Sensor: Range 750 - 1140mBAR

Brake Pressure Sensor for KIT System
Includes banjo mount & seals Cable fitted with TYCO pins

Wire Potentiometer Range 76mm

Wire Potentiometer Range 225mm

Non Contact Ride Height (Displacement) sensor:
Range 12 - 145mm

Linear Potentiometer for KIT system:
Range 75mm No Connectors

Linear Potentiometer for KIT system:
Range 150mm No Connectors

High Quality Linear Potentiometer:
Range 10mm

Linear Potentiometer:
Range 50mm

Linear Potentiometer:
Range 75mm

Linear Potentiometer:
Range 125mm

Linear Potentiometer:
Range 150mm

Non Contact Ride Height (Displacement) sensor:
50-500mm "Teachable" output

Wire Potentiometer Range 380mm

Wire Potentiometer Range 760mm

Wire Potentiometer Range 120.65mm

Wire Potentiometer Range 317.5mm

Wire Potentiometer Range 635mm

Wire Potentiometer Range 1250mm

Static Accelerometer High Quality:1-Axis:+/- 1g.

Static Accelerometer High Quality:3-Axis:+/- 5g

Static Accelerometer Basic:1-Axis:+/- 5g.

Static Accelerometer Basic:2-Axis:+/- 5g.

Static Accelerometer High Quality:1-Axis:+/- 10g.

Static Accelerometer High Quality:1-Axis:+/- 50g.

Yaw Rate Sensor (gyro): Range +/- 200 Deg/Sec

Yaw Rate Sensor (gyro): Range +/- 500 Deg/Sec

3 Axis accelerometer 2g with 1 Axis gyro 300 Deg/s with CAN output

Denonation Sensor: 2 Stroke only KL= xxxx mm

Shift sensor ±1000N, thread M6
open wires
cable length 170mm
Supply 12VDC Ouput 0.5VDC ~ 4.5VDC

Data Logger6:
16 * Analogue (16 BIT)
8 * Digital
160 * CAN
3.2KHz Sampling
TCP/IP & USB 1GB Memory Carbon Housing

L7 Logger:
32 Analogue inputs,
2 Digital Inputs,
1 CAN Bus 256 ch. 2GB

L09 Profi System includes:
- Logger LG-KIT09
- GPS Mouse
- User configurable 75 min Recording Time

L08 Engineering System includes:
- Logger LG-KIT08
- GPS Mouse
- User configurable
- Hi Res inputs
- Full traceable calibration ...

Bike KIT System includes:

- Logger TrackDay Level

- GPS Mouse

- Mini Dash

- Inductive Wheel Sensor

- KIT ...

Bike KIT System includes:

- Logger LG-KIT09

- CAN in configured for Motec ECU

- GPS Mouse

- Mini Dash

- ...

Big Dash Display 2nd Generation 2 CAN line

LapTrigger Receiver for KIT System

Fixed Code

Tyco Pins

LapTrigger Transmitter for KIT System

Fixed Code

MiniDash LCD display

32 Channels on 6 pages

CAN Monitor

Auto Zero function

8 Programmable LED''s (eg Shift ...

Inductive Speed Sensor for KIT System

Magnetic Field RPM detector

Optical Speed Sensor Mounting distance <= 120mm

Complete programming set for all 2D hardware via USB to CAN Includes cables, power supply & software

CAN BUS extension to connect 4 CAN modules

CAN BUS extension to connect 4 CAN modules:

Includes:

120 Ohm termination resistor

3 * 5 pin connector

1 * 8 pin ...

Analogue to CAN module:

8* Analogue input

16 BIT resolution

2 * Binder 712/8 pin connectors on flying leads

Analogue to CAN module:

8* Analogue input

16 BIT resolution

1 * 22 pin connector

Analogue to CAN Module:

8 x Differential Analogue inputs

16 BIT resolution.6.4KHz/ch sampling

CAN output

2 * Binder ...

Calc Channel to CAN module:

Convert 8 * online calculation channels to CAN

GPS CAN Module:

3.125Hz with CAN output

Includes antenna

2 Stroke CAN Module for KIT Systems:

1 * Detonation

1 * Pressure

1 * Temperature

CAN output & configured for ...

2 Stroke CAN Module:

1 * Detonation

1 * Cylinder Pressure

2 * Temperatures

CAN Output

PT100 to CAN Module:

8 * PT100 inputs

CAN Output

PT100 to CAN Module:

8 * PT1000 inputs

CAN Output

Isolated K-Type Thermocouple to CAN module (4 channel)

Isolated K-Type Thermocouple to CAN module (8 channel)

K-Type amplifier 0-1000 degC

Inertial System.High resolution 3-axis +/- 10G accelerometers and 3-axis +/- 300deg/sec Gyros.
800Hz data rate.350Hz bandwidth.12-bit ...