To measure current on electric circuits or hybrid vehicles (SENACA or SENADC)

The VDPMOD-OBD connects to the J1962 diagnostic connector of the vehicle. It translates OBD II signals to HS-CAN data. An onboard microprocessor ...

The VDPOBD connects the recorder to the J1962 diagnostic connector of the vehicle. It uses the power from the vehicle bus to supply the Recorder.It ...

The GPS receiver obtains the actual vehicle position and velocity from up to 12 different satellites. It sends information to the Recorder serial ...

The GPS receiver obtains the actual vehicle position and velocity from up to 14 different satellites. It sends information to the Recorder high speed ...

This sensor accurately measures the temperature of fluids, e.g. engine coolant, engine oil or air temperature. The sensor is available with or without ...

The MODTMx provides cold junction compensation, amplify and linearize electrical signals from type J or type K thermocouples. It can be used for ...

The TCKEGT is specifically designed for installation over the gas exhaust pipe drilled hole. It features high temperature stainless steel construction ...

The TCKSTK is practical because of its adhesiveness and small size. It is typically used in areas where more cumbersome thermocouples can not be ...

The SENPAP measures absolute pressure present at its port. It can be used to measure manifold absolute pressure of a normally aspirated or ...

The fluid pressure sensor is used to measure engine oil pressure, braking effort, and hydraulic or pneumatic systems activity. It can be used with any ...

The fluid pressure sensor is used to measure engine oil pressure, braking effort, and hydraulic or pneumatic systems activity. It can be used with any ...

The SENST2 is a position sensor which can measure position of various mechanical setups, where motion is neither rotational nor translational. Because ...

The magnetic detector is used to measure the speed and/or RPM as it generates an electrical signal when the pole of a magnet or the edge of a metallic ...

The isolated detector outputs an electric signal when an acceptable voltage is applied to its input. The two electric signals are isolated from each ...

The optical detector is used to measure the speed and/or RPM. It sends an infrared beam, and when refelected by a polarizing object (supplied adhesive ...

The spark detector outputs an electric signal when it senses an electric current burst through the high-tension output of the ignition coil. It is ...

The SENAC1, SENAC2, SENVI1 and SENVI2 measure the low-frequency accelerations up to 400Hz. The SENVI1 and SENVI2 are AC-Coupled with a single pole ...

The EMTIRB emits a wide infrared beam that is used as a lap delimiter. The EMTIRB is used in conjunction with the Infrared Detector (DTCIRB) to ...

The DTCIRB receives a coded-infrared signal from the EMTIRB to fragment data into many segments as desired. The DTCIRB may be coded on 64 different ...

Stand-alone data recorder for mobile applications 512 MBytes of memory, with data retention in case of power loss 5 internal sensors: - 3 ...

Stand-alone data recorder for mobile applications 512 MBytes of memory, with data retention in case of power loss 8 external inputs: analog, ...

Stand-alone data recorder for mobile applications 512 MBytes of memory, with data retention in case of power loss 8 external inputs: analog, ...

Stand-alone data recorder for mobile applications 512 MBytes of memory, with data retention in case of power loss 16 external inputs: analog, ...

The detector outputs an electric signal when an acceptable voltage is applied on its input. The two electric signals are isolated from each ...

The SENHSC provides precise solutions for current sensing in industrial, automotive, commercial and communications systems. Measure DC ...

SENADC and SENACA are Hall effect sensors which output a signal proportional to the sum of electric currents in the conductor(s) passing ...

Hybrid and Electric Vehicles- SENVxC- AC & DC Isolated Electrical Voltage Sensors

Data Recorder Unit 900,3 internal 2G/6G accelerometers,1internal supply voltage channel,1 internal temp channel,3 x COM ports,2 x HS CAN ports,1 ...

Data Recorder Unit 908. 8 x Universal inputs (analogue/digital/state),3 internal 2G/6G accelerometers,1internal supply voltage channel,1 internal temp ...

Data Recorder Unit 908-SLD. 8 x Universal inputs (analogue/digital/state),3 internal 2G/6G accelerometers,1internal supply voltage channel,1 ...

Data Recorder Unit 916. 16 x Universal inputs (analogue/digital/state),3 internal 2G/6G accelerometers,1internal supply voltage channel,1 internal ...

High precision GPS receiver and integrated antenna.20Hz.
HS-CAN output.Magnetic base mounting antenna.IDN connector.Novatel engine with OMNISTAR ...

Wheatstone Bridge Conditioner Module.8mV/V,Tension & Compression. (for load cells,etc)

 AC Current Sensor,Hall Effect.350A.

DC Current Sensor,Hall Effect,+/- 40ADC

Absloute Fluid Pressure Sensor.300 psi .1/4 NPT.

Relative Humidity (0 to 100% RH) Sensor.

Rotational position sensor,350 Deg.

Wire Position Sensor (Spring Loaded).12.5 inches (317mm) stroke.
Operating Temp -18 to 70 degC.

Exhaust Gas Thermocouple Temperature Sensor

Thermocouple,Type K,self-adhesive.