One data logger – multiple applications
With the intelligent imc BUSDAQflex data logger series you have access to the usual bus systems of the automotive, railway, aircraft and machine industry. In addition to the acquisition of raw data streams and protocol channels, the live decoding of individual channels as well as complex protocols such as CCP, KWP2000, XCP, OBD2, etc. are supported. The standard basic configuration of 2 CAN nodes can be extended to 12 nodes for different field and vehicle buses for the larger device variants.
The imc BUSDAQflex series is used to acquire measurement information from vehicle, railway and aviation buses. In the basic configuration, the system has two CAN nodes. Depending on the selected housing size, these can be extended up to twelve nodes for different field and vehicle buses. In addition to CAN, interfaces to LIN, FlexRay, ARINC, MVB, XCPoE and CAN FD are available. Furthermore, it is possible to connect additional protocols and buses via a programmable APPMOD interface with Ethernet or RS232 interface.
In addition to recording raw data streams and protocol channels, imc BUSDAQflex also supports live decoding of individual channels as well as complex protocols such as CCP, KWP2000, XCP, OBD2, UDS, DiagOnCan, TP2.0 and GMLAN.
Provides 2 to 12 CAN nodes depending on selected housing size
Expandable to include interfaces for all common vehicle, railway and aviation buses such as CAN FD, LIN, J1939, FlexRay, ARINC, MVB, XCPoE
Handles a variety of protocols such as CCP, XCP, KWP2000, OBD-2, UDS, DiagOnCAN, …
Autonomous operation with self-start capability (wake-up on CAN)
Trigger, real-time data processing, internal data storage
Wide operating temperature range from -40 °C to +85 °C • GPS position detection
-40 °C to +85 °C
MIL-STD-810F
10-50VDC input range
UPS to protect against loss of data in the event of a power failure
200ms start-up time in sleep mode
GPS records position and motion data
imc BUSDAQflex-2-S / imc BUSLOGflex
imc BUSDAQflex-4
imc BUSDAQflex-6
imc BUSDAQflex-8